Cisco RV120W Administration Guide

Cisco RV120W Administration Guide 6
Contents
Configuring Network Management 121
Configuring SNMP 121
Editing SNMPv3 Users 121
Adding SNMP Traps 122
Configuring Access Control Rules 122
Configuring Additional SNMP Information 123
Configuring the WAN Traffic Meter 123
Using Network Diagnostic Tools 125
Using PING 125
Using Traceroute 125
Performing a DNS Lookup 126
Capturing and Tracing Packets 126
Configuring Logging 126
Configuring Logging Policies 127
Configuring Firewall Logs 127
Configuring Remote Logging 128
Configuring Email Logging 129
Configuring the Discovery Settings 130
Configuring Bonjour 130
Configuring UPnP 131
Configuring Time Settings 132
Backing Up and Restoring the System 132
Upgrading Firmware 134
Rebooting the Cisco RV120W 134
Restoring the Factory Defaults 135
Chapter 8: Viewing the Cisco RV120W Status 136
Viewing the Dashboard 136
Viewing the System Summary 139
Viewing the Wireless Statistics 142
IPsec Connection Status 143
Viewing VPN Client Connection Status 144

Cisco RV120W Specifications

General

Ethernet LAN	Yes
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity	10
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Channels quantity	13 channels
WLAN data transfer rate (max)	300 Mbit/s
Input current	1 A
Input voltage	12 V
xDSL connection	No
Dimensions (WxDxH)	150 x 150 x 34 mm
Networking features	Fast Ethernet, WLAN, WAN
Operating temperature (T-T)	32 - 104 °F
Security algorithms	802.1x RADIUS, EAP, WPA2
Antennas quantity	2
Antenna gain level (max)	1.8 dBi
Ethernet LAN (RJ-45) ports	4
Certification	FCC B, CE, IC, Wi-Fi
Product color	Black
Storage temperature (T-T)	-20 - 70 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Weight	500 g