3-22 ES45 Owner's Guide
3.5 Booting OpenVMS
OpenVMS canbebootedfromaCD-ROMonalocaldrive(theCD-ROM
drive connected to the system) or from a CD-ROM drive on the
InfoServer.
Example 3–5 Booting OpenVMS from the Local CD-ROM Drive
P00>>> show device
dka0.0.0.1.1 DKA0 RZ2CA-LA N1H0
dka100.1.0.1.1 DKA100 RZ2CA-LA N1H0
dqa0.0.0.15.0 DQA0 TOSHIBA CD-ROM XM-6302B 1012
dva0.0.0.1000.0 DVA0
ewa0.0.0.6.1 EWA0 00-00-F8-10-D6-03
pka0.7.0.1.1 PKA0 SCSI Bus ID 7
P00>>>
.
.
.
P00>>> boot -flags 0,0 dqa0
(boot dqa0.0.0.1.1 -flags 0,0)
block 0 of dqa0.0.0.1.1 is a valid boot block
reading 898 blocks from dka0.0.0.1.1
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 70400
initializing HWRPB at 2000
initializing page table at 3ffee000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
OpenVMS (TM) Alpha Operating System, Version V7.3
To Next Page
Loading...
Need help?
General
