Configuring and Installing Components 4-7
4.2 Removing Covers from the System Chassis
WARNING: To prevent injury, access is limited to persons who
have appropriate technical training and experience. Such per-
sons are expected to understand the hazards of working within
this equipment and take measures to minimize danger to them-
selves or others.
V @ >240VA
WARNING: High current area. Currents exceeding
240 VA can cause burns or eye injury. Avoid con-
tact with parts or remove power prior to access.
WARNING: Contact with moving fan can cause se-
vere injury to fingers. Avoid contact or remove
power prior to access.
WARNING: The system chassis houses parts that
operate at high temperatures. Wait 2 minutes after
power is removed before touching any module.
To Next Page
Loading...
Need help?
General
