Troubleshooting 7-19
7.5 Troubleshooting Tables
This section describes some strategies for troubleshooting problems
that might prevent the system from completing its power-up or that
might prevent you from booting the operating system. Use the
troubleshooting tables on the following pages to diagnose the following
types of problems.
• Power problems
• Problems that prevent the system from powering up to the SRM console
prompt
• Failures reported on the SRM console
• Boot problems
• Errors reported by the operating system
NOTE: Check your service agreement before handling internal parts of the
system. If in doubt, contact your service provider.
See Chapter 6 for RMC troubleshooting.
To Next Page
Loading...
