2-6 ES45 Owner's Guide
2.2.2 SRM Console Power-Up Display
At the completion of SROM power-up, the primary CPU transfers con-
trol to the SRM console program, described in Section 2.3. The console
program continues the system initialization. Failures are reported to
the console terminal through the power-up screen and a console event
log.
Example 2–2 SRM Power-Up Display
OpenVMS PALcode V1.88-28, Tru64 UNIX PALcode V1.83-24
starting console on CPU 0
initialized idle PCB
initializing semaphores
initializing heap
initial heap 240c0
memory low limit = 1e6000
heap = 240c0, 17fc0
initializing driver structures
initializing idle process PID
initializing file system
initializing timer data structures
lowering IPL
CPU 0 speed is 1000 MHz
create dead_eater
create poll
create timer
create powerup
access NVRAM
4096 MB of System Memory
Testing Memory
...
probe I/O subsystem
Hose0-PCIbusrunningat33Mhz
entering idle loop
probing hose 0, PCI
probing PCI-to-ISA bridge, bus 1
probing PCI-to-PCI bridge, bus 2
bus0,slot8--pka--NCR53C895
bus 0, slot 9 -- eia -- DE600-AA
bus2,slot0--pkb--NCR53C875
bus2,slot1--pkc--NCR53C875
bus 2, slot 2 -- ewa -- DE500-AA Network Controller
bus 0, slot 16 -- dqa -- Acer Labs M1543C IDE
bus 0, slot 16 -- dqb -- Acer Labs M1543C IDE
Hose1-PCIbusrunningat66Mhz
probing hose 1, PCI
bus 0, slot 2 -- vga -- 3Dlabs OXYGEN VX1
Hose2-AGPbus
To Next Page
Loading...
Need help?
General
