Index-1
Index
A
Acoustics, 8-10
Allocation
memory, 4-12
APB program, 3-25
auto_action environment variable, 3-3, 5-3, 5-44
auto_action environment variable, SRM, 5-35
Autoboot, 5-44
Auxiliary power supply, RMC, 6-3
B
Baud rate, setting, 5-52
boot command (SRM), 5-25
Boot devices, specifying, 5-46
Boot file, specifying, 5-47
Boot flags
OpenVMS, 3-8, 5-50
UNIX, 3-6, 5-48
Boot options, 3-2
Boot problems, 7-23
Boot procedure
OpenVMS, 3-23
UNIX, 3-14
Linux, 3-19
boot_file environment variable, 3-5, 5-47
boot_osflags environment variable, 3-6, 5-48
Bootable devices, displaying, 5-17
bootdef_dev environment variable, 3-4, 5-46
Booting
Linux, 3-19
OpenVMS, 3-22
OpenVMS, from InfoServer, 3-24
OpenVMS, from local CD-ROM, 3-22
UNIX, from SCSI disk, 3-13
UNIX, from the network, 3-15
bootp protocol, 3-11, 5-62
Bus node ID, SCSI, 5-70
Bypass modes, 6-6
Bypassing the RMC, 6-6
C
Chassis
system building blocks, 1-4
Checksum error, 7-4
clear alert command (RMC), 6-27
clear password command (SRM), 2-32
clear port command (RMC), 6-28
Clearing SRM password, 2-32
COM ports, baud rate, 5-52
com*_baud environment variable, 5-52
com*_flow environment variable, 5-53
com*_modem environment variable, 5-56
COM1 environment variables, 6-10
com1_baud environment variable, 5-52
com1_flow environment variable, 5-53
com1_mode environment variable, 5-54, 6-4
com1_modem environment variable, 5-56
com2_baud environment variable, 5-52
com2_flow environment variable, 5-53
com2_modem environment variable, 5-56
Command conventions, RMC, 6-13
Command syntax, SRM console, 5-6
Components
system chassis, 1-4
system front, 1-6
system rear, 1-7
Configuration
CPU, 4-20
memory, 4-25
PCI, 4-31
power supply, 4-16
Connections
rear panel, 1-9