5-4 ES45 Owner's Guide
5.3 SRM Command Overview
Table 5–1 summarizes alphabetically the most frequently used SRM
console commands; Table 5–2 gives the command notation formats; and
Table 5–3 shows special characters used on the command line.
Table 5–1 Summary of SRM Console Commands
Command Function
boot
Loads and starts the operating system.
continue Resumes program execution on the specified processor or on
the primary processor if none is specified.
crash
Forces a crash dump at the operating system level.
edit Invokes the console line editor on a RAM script or on the
user power-up script, “nvram,” which is always invoked dur-
ing the power-up sequence.
help (or man)
command
Displays information about the specified console command.
init
Resets the SRM console and reinitializes the hardware.
more [file-
name]
Displays a file one screen at a time.
rmc Invokes the remote management console from the local VGA
monitor.
set envar
Sets or modifies the value of an environment variable.
show envar
Displays the state of the specified environment variable.
Continuedonnextpage
To Next Page
Loading...
Need help?
General
