Firmware 5-5
Table 5–1 Summary of SRM Console Commands (Continued)
Command Function
show config Displays the logical configuration at the last system initiali-
zation.
show device Displays a list of controllers and bootable devices in the sys-
tem.
show error
Reports errors logged in the EEPROMs.
show fru Displays the physical configuration of all field-replaceable
units (FRUs).
show mem-
ory
Displays information about system memory.
show pal Displays the versions of Tru64 UNIX and OpenVMS PAL-
code.
show power Displays information about system environmental character-
istics, including power supplies, system fans, CPU fans, and
temperature.
show version Displays the version of the SRM console program installed on
the system.
test
Verifies the configuration of the devices in the system.
NOTE: Diagnostic commands are documented in the ES45 Service Guide.