Firmware 5-29
5.8 Forcing a System Crash Dump
The crash command causes an operating system that has hung to crash
so that you can capture a crash dump to the selected device.
Example 5–12 Crash
P00>>> crash
CPU 0 restarting
DUMP: 19837638 blocks available for dumping.
DUMP: 118178 wanted for a partial compressed dump.
DUMP: Allowing 2060017 of the 2064113 available on 0x800001
devicestringfordump=SCSI1100000.
DUMP.prom:devSCSI1100000,block2178787
DUMP: Header to 0x800001 at 2064113 (0x1f7ef1)
devicestringfordump=SCSI1100000.
DUMP.prom:devSCSI1100000,block2178787
DUMP: Dump to 0x800001: .......: End 0x800001
devicestringfordump=SCSI1100000.
DUMP.prom:devSCSI1100000,block2178787
DUMP: Header to 0x800001 at 2064113 (0x1f7ef1)
succeeded
halted CPU 0
halt code = 5
HALT instruction executed
PC = fffffc0000568704
P00>>>
To Next Page
Loading...
