Operation 2-13
2.4 Displaying the Hardware Configuration
View the system hardware configuration from the SRM console. It is
useful to view the hardware configuration to ensure that the system
recognizes all devices, memory configuration, and network connec-
tions.
Use the following SRM console commands to view the system configuration.
show boot*
Displays the boot environment variables.
show config Displays the logical configuration of interconnects and buses
on the system and the devices found on them.
show device
Displays the bootable devices and controllers in the system.
show fru Displays the physical configuration of FRUs (field-replaceable
units). See Chapter 7 for information on this command.
show memory
Displays configuration of main memory.
To Next Page
Loading...
Need help?
General
