2-30 ES45 Owner's Guide
2.6.3 Turning Off Security During a Console Session
The login command turns off the security features, enabling access to
all SRM console commands during the current console session. The
system automatically returns to secure mode as soon as the boot or
continue command is entered or when the system is reset.
Example 2–11 Login
P00>>> login
Secure not set. Please set the password.
P00>>> set password
Please enter the password:
Please enter the password again:
P00>>> login
Please enter the password.
P00>>> show boot*
The login command is entered, but the system is not in secure mode. A
password must be set.
A password is set.
The login command is entered. After the password is entered, console secu-
rity is turned off for the current session and the operator can enter com-
mands.