Remote Management 6-1
Chapter 6
Remote Management
You can manage the system through the remote management console (RMC).
The RMC is implemented through an independent microprocessor that resides
on the system board. The RMC also provides configuration and error log func-
tionality.
This chapter explains the operation and use of the RMC. Sections are:
• RMC Overview
• Operating Modes
• Terminal Setup
• SRMEnvironmentVariablesforCOM1
• Entering the RMC
• Using the Command-Line Interface
• Resetting the RMC to Factory Defaults
• RMC Command Reference
• Troubleshooting Tips