Compaq AlphaServer ES45 1B User Manual

6-10 ES45 Owner's Guide
6.4 SRM Environment Variables for COM1
Several SRM environment variables allow you to set up the COM1 se-
rial port (MMJ) for use with the RMC.
You may need to set the following environment variables from the SRM console,
depending on how you decide to set up the RMC.
com1_baud
Sets the baud rate of the COM1 serial port and the
modem port. The default is 9600. See Chapter 5.
com1_flow
Specifies the flow control on the serial port. The de-
fault is software. See Chapter 5.
com1_mode
Specifies the COM1 data flow paths so that data ei-
ther flows through the RMC or bypasses it. This envi-
ronment variable can be set from either the SRM or
the RMC. See Section 6.8.
com1_modem
Specifies to the operating system whether or not a
modem is present. See Chapter 5.

Compaq AlphaServer ES45 1B Specifications

General

Brand	Compaq
Model	AlphaServer ES45 1B
Category	Server
Language	English