Compaq AlphaServer ES45 1B

Index-6
S
SCSI bus length, 4-53
SCSI controller IDs, 5-70
SCSI devices, speed of, 5-69
SCSI expansion, 4-53
SCSI terminators, enabling, 5-71
Secure function commands, 2-26
Secure mode, setting SRM to, 2-29
Security features, turning off, 2-30
send alert command (RMC), 6-33
Serial ports
determining presence of modem on, 5-56
flow control, 5-53
set alert command (RMC), 6-34
set com1_mode command (RMC), 6-34
set command (SRM), 5-40, 5-41
set dial command (RMC), 6-36
set escape command (RMC), 6-36
setinitcommand(RMC),6-37
setlogoutcommand(RMC),6-37
setocp_textcommand(SRM),2-12
set password command (RMC), 6-38
set password command (SRM), 2-27
set secure command (SRM), 2-29
set user command (RMC), 6-38
Setting SRM environment variables, 2-25
Shared RAM, 6-3
show boot* command (SRM), 2-14
show command (SRM), 2-13, 5-40, 5-41
show config command (SRM), 2-16, 5-11
show device command (SRM), 2-22, 5-17
show error command (SRM), 5-21, 7-16
show fru command (SRM), 5-18, 7-14
show memory command (SRM), 2-24, 5-22
show pal command (SRM), 5-22
show power command (SRM), 5-23, 7-17
show version command (SRM), 5-24
Slot numbers
CPUs, 4-19
PCI, 4-32, 4-33, 4-34
Snoop mode, 6-7
Soft bypass mode, 6-7
Special characters, SRM console, 5-7
Specifications, 8-2
SRM
console password, 2-27
console password clearing, 2-32
SRM console
command syntax, 5-6
device naming, 2-23
device naming conventions, 5-17
displaying system configuration, 5-11
finding help, 5-10
invoking, 5-3
invoking from RMC, 5-3
power-up display, 2-6
reading a file, 5-32
resetting firmware, 5-33
setting environment variables, 5-40
special characters, 5-7
tasks performed from, 5-9
testing the system, 5-27
version, 5-24
SRM console commands, 5-4
boot, 5-25
clear password, 2-32
crash, 5-29, 7-18
edit, 5-37
help, 5-10
init, 5-33
login, 2-30
man, 5-10
more, 5-32
rmc, 5-38
set, 5-40, 5-41
set password, 2-27
set secure, 2-29
show, 5-40, 5-41
show boot*, 2-14
show config, 2-16, 5-11
show device, 2-22, 5-17
show error, 5-21, 7-16
show fru, 5-18, 7-14
show memory, 2-24, 5-22
show pal, 5-22
show power, 5-23, 7-17
show version, 5-24
test, 5-27, 7-13
SRM console prompt, 2-10
SRM diagnostics, 7-11
SRM environment variables, setting, 2-25