5-40 ES45 Owner's Guide
5.14 Setting and Viewing Environment Variables
Use the set envar and show envar commands to set and view environ-
ment variables.
Example 5–19 Set envar and Show envar
P00>>> set bootdef_dev dkb0
P00>>> show bootdef_dev
Bootdef_dev dkb0
Environment variables pass configuration information between the console and
the operating system. Their settings determine how the system powers up,
boots the operating system, and operates. Environment variables are set or
changed with the set envar command. Their values are viewed with the show
envar command.
To Next Page
Loading...
