Firmware 5-41
set envar
Description
The set command sets or modifies the value of an environment variable. It can
also be used to create a new environment variable if the name used is unique.
Environment variables pass configuration information between the console and
the operating system. Their settings determine how the system powers up, boots
the operating system, and operates.
Syntax
set envar value
envar The name of the environment variable to be modified. See
Table 5–10 for a list of environment variables
value Thenewvalueoftheenvironmentvariable.
New values for the following environment variables take effect only after you
reset the system by pressing the Reset button or by issuing the init command.
A reset or init is also required when setting up environment variables for an
OpenVMS Galaxy configuration. See the DS20E-ES45 Remedial Kit available
from http://www.service.compaq.com/patches.
auto_action
console
cpu_enabled
os_type
pk*0_fast
pk*0_host_id
pk*0_soft_term
show envar
Description
The show envar command displays the current value (or setting) of an envi-
ronment variable.
Syntax
show envar
To Next Page
Loading...
Need help?
General
