3-24 ES45 Owner's Guide
3.5.1 Booting OpenVMS from the InfoServer
You can boot OpenVMS from a LAN device on the InfoServer. The de-
vices are designated EW*0 or EI*0. The asterisk stands for the adapter
ID(a,b,c,andsoon).
Example 3–6 InfoServer Boot
P00>>> show device
dka0.0.0.1.1 DKA0 RZ2CA-LA N1H0
dka100.1.0.1.1 DKA100 RZ2CA-LA N1H0
dqa0.0.0.15.0 DQA0 TOSHIBA CD-ROM XM-6302B 1012
dva0.0.0.1000.0 DVA0
ewa0.0.0.6.1 EWA0 00-00-F8-10-D6-03
pka0.7.0.1.1 PKA0 SCSI Bus ID 7
P00>>>
.
.
.
P00>>> boot -flags 0,0 -file apb_073 ewa0
(boot ewa0.0.0.6.1 -file APB_073 -flags 0,0)
Trying MOP boot.
.............
Network load complete.
Host name: CALSUN
Host address: aa-00-04-00-a4-4e
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 70400
initializing HWRPB at 2000
initializing page table at 3ffee000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code