4-2 ES45 Owner's Guide
!
WARNING: To prevent injury, access is limited to persons who
have appropriate technical training and experience. Such per-
sons are expected to understand the hazards of working within
this equipment and take measures to minimize danger to them-
selves or others. These measures include:
1. Remove any jewelry that may conduct electricity.
2. If accessing the system card cage, power down the system and
wait 2 minutes to allow components to cool.
3. Wear an anti-static wrist strap when handling internal com-
ponents.
WARNING: To prevent injury, unplug the power
cord from each power supply before installing com-
ponents.
Installation Tools
You need the following tools to install components.
• Phillips #2 screwdriver (a magnetic screwdriver is recommended)
• Allenwrench(3mm)
• Anti-static wrist strap
To Next Page
Loading...
