4-14 ES45 Owner's Guide
After the console completes its final reinitialization, the console banner is dis-
played, followed by the P00>>> prompt. Enter the show heap_expand com-
mand

to verify that the console has allocated more memory. You can then
boot the operating system. No other action is required, and the crash/reboot
cycle should not occur again.
If you subsequently change your configuration, enter the following command to
reset the heap space to its default before you boot the system:
P00>>> set heap_expand none
Resizing may or may not occur again, depending on whether the console re-
quires additional heap space.
To Next Page
Loading...
Need help?
General
