5-52 ES45 Owner's Guide
5.14.5 com*_baud
The default baud rate for the system is 9600. The com*_baud com-
mands set the baud rate for COM1 and COM2.
com1_baud
The com1_baud environment variable sets the baud rate for the internal
COM1 serial interface.
com2_baud
The com2_baud environment variable sets the baud rate to match that of the
device connected to the COM2 port.
Syntax
set com*_baud baud_value
baud_value The new baud rate. A list of possible values is displayed by en-
tering the command without a value.
Example
The following example shows the supported baud rate values.
P00>>> set com2_baud
57600
38400
19200
9600
7200
4800
3600
2400
2000
1800
To Next Page
Loading...
