6-12 ES45 Owner's Guide
Entering from the Local VGA Monitor
To enter the RMC from the local VGA monitor, the console environment vari-
ablemustbesettographics.
Invoke the SRM console and enter the rmc command.
P00>>> rmc
You are about to connect to the Remote Management Console.
Use the RMC reset command or press the front panel reset but-
ton to disconnect and to reload the SRM console.
Do you really want to continue? [y/(n)] y
Please enter the escape sequence to connect to the Remote Man-
agement Console.
After you enter the escape sequence, the system enters the CLI and the RMC>
prompt is displayed.
When the RMC session is completed, reset the system with the Reset button on
the operator control panel or issue the RMC reset command.
RMC> reset
Returning to COM port
To Next Page
Loading...
