Compaq AlphaServer ES45 1B User Manual

Remote Management 6-19
Halt In and Halt Out
The halt in command halts the system. The halt out command releases the
halt. When you issue either the halt in or halt out command, the terminal
exits RMC and reconnects to the server's COM1 port.
RMC> halt in
Returning to COM port
RMC> halt out
Returning to COM port
The halt out command cannot release the halt if the Halt button is latched in.
If you enter the halt out command, the message “Halt button is IN” is dis-
played, indicating that the command will have no effect. Toggling the Power
button on the operator control panel overrides the halt in condition.
Reset
The RMC reset command restarts the system. The terminal exits RMC and
reconnects to the server’s COM1 port.
RMC> reset
Returning to COM port

Compaq AlphaServer ES45 1B Specifications

General

Brand	Compaq
Model	AlphaServer ES45 1B
Category	Server
Language	English