Operation 2-15
boot_dev Device or device list from which booting is to be at-
tempted, here SCSI device dka0.
boot_file The default file name used for the primary bootstrap
when no file name is specified by the boot command.
boot_osflags
Boot flags, here the Tru64 UNIX “a” (autoboot) flag.
boot_reset
Action taken in response to an error halt or boot com-
mand. OFF, the default, indicates a warm boot (no full
reset is performed).
bootdef_dev Device or device list from which booting is to be attempted
when no path is specified on the command line. Here,
SCSI device dka0.
booted_dev
The device from which booting occurred.
booted_file The file name used for the primary bootstrap during the
last boot.
booted_osflags
Additional parameters, if any, specified by the last boot
command that are to be interpreted by system software.
To Next Page
Loading...
Need help?
General
