Wireless Controller CLI Reference Guide
88
Save ipv4 Option configuration changes.
Roll back ipv4 Option configuration changes.
Save ipv4 Option configuration changes and current
mode.
Select among the options: STATIC, DHCP Client,
PPPoE, PPTP, L2TP, Russian PPTP, Russian L2TP,
Japanese Multiple PPPoE
If ISP Type selected is DHCPC, this field gives you
options to configure DHCPC credentials
Enter Yes to get dns dynamically from ISP if you
have not been assigned any static IP address. The
ISP w ill automatically assign an DNS address to the
router using DHCP netw ork protocol. Otherwise
Enter No and give valid static dns addresses
Valid primary DNS Server IP Address
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
Valid secondary DNS Server IP Address
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
Select Mac Address source
Types of mac address source
MAC address
AA:BB:CC:DD:EE:FF where each
part is in the range 00-FF
If ISP Type selected is STATIC, this field gives you
options to configure STATIC credentials
If Address Mode is Static,give static ip
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
IPv4 Subnet Mask. This is usually provided by the
ISP or your netw ork administrator.
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
IP address of the ISPb s gateway. This is usually
provided by the ISP or your netw ork administrator.
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
Valid primary DNS Server IP Address
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
Valid secondary DNS Server IP Address
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
Select the Mac Address Source
Types of mac address source
MAC address
AA:BB:CC:DD:EE:FF where each
part is in the range 00-FF
If ISP Type selected is PPPoE, this field gives you
options to configure PPPoE credentials
Enter the username to authenticate
Enter the passw ord to authenticate