D-Link DWC-1000 Reference Guide

Wireless Controller CLI Reference Guide
89
String
23
pppoe service
Enter the passw ord to authenticate
String
24
pppoe authOpt
Enter the Auth Option to authenticate
PPPOE Authentication Types.
25
pppoe connectivity_type
Enter the connectivity type
ISP Connectivity Types.
26
pppoe idletime
Enter the idle time
idle timeout value type.
27
pppoe get_dns_from_isp
Enter Yes to get dns dynamically from ISP if you
have not been assigned any static IP address. The
ISP w ill automatically assign an DNS address to the
router using PPPOE network protocol. Otherwise
Enter No and give valid static dns addresses
Boolean choice
28
pppoe primary_dns
Valid primary DNS Server IP Address
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
29
pppoe secondary_dns
Valid secondary DNS Server IP Address
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
30
pppoe get_ip_from_isp
Enter Yes to get IP dynamically from ISP if you have
not been assigned any static IP address. The ISP w ill
automatically assign an IP address to the router
using PPPOE network protocol. Otherwise Enter No
and give valid static IP address
Boolean choice
31
pppoe static_ip
Valid IP Address
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
32
pppoe subnet_mask
Valid subnet mask
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
33
pppoe mac_type
Select the Mac Address Source
Types of mac address source
34
pppoe mac_address
enter Valid MAC address
MAC address
AA:BB:CC:DD:EE:FF where each
part is in the range 00-FF
35
pptp
If ISP Type selected is PPTP, this field gives you
options to configure PPTP credentials
36
pptp username
Enter the username to log in
String
37
pptp password
Enter the passw ord to log in
String
38
pptp mmpe_encryption
Enter the MMPE Encryption
Boolean choice
39
pptp split_tunnel
select the split_tunnel
Boolean choice
40
pptp gateway
Gateway assigned by the ISP to make a connection
w ith the ISP server
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
41
pptp server_address
IP address of the PPTP server (if applicable
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
42
pptp connectivity_type
Set ISP Type
ISP Connectivity Types.
43
pptp idle_time
Set ISP Type
idle timeout value type.

D-Link DWC-1000 Specifications

General

Ethernet LAN	Yes
Wi-Fi standards	802.11a, 802.11b, 802.11g
Networking standards	IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3ad, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Number of managed Wi-Fi Access Points (max)	6
Security algorithms	3DES, DES, WEP, WPA, WPA2
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Certification	FCC B, CE B, VCCI, C-tick, IC, cUL, LVD (EN60950-1)
Built-in display	No
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Power requirements	DC 12V/2.5A
Power consumption (typical)	19.3 W
Pallet width	1200 mm
Pallet length	1100 mm
Pallet height (air)	1419 mm
Pallet height (sea)	1847 mm
Pallet gross weight (air)	415236 g
Pallet gross weight (sea)	545648 g
Quantity per pallet (air)	144 pc(s)
Quantity per pallet (sea)	192 pc(s)
Shipping (inner) case width	296 mm
Shipping (inner) case height	428 mm
Shipping (inner) case length	354 mm
Shipping (inner) case weight	10826 g
Shipping (inner) case net weight	10016 g
Number of cartons per pallet (air)	36 pc(s)
Number of cartons per pallet (sea)	48 pc(s)
Quantity per shipping (inner) case	4 pc(s)

Weight and Dimensions

Package depth	396 mm
Package width	273 mm
Package height	80 mm
Package weight	2504 g
Dimensions (WxDxH)	280 x 180 x 44 mm