Danfoss iC2 - Page 281

Application Guide | iC2-Micro Frequency Converters
Group index Group name Parameter
index
Parameter name Parameter
number
Type
5.5.3.9 Reference 3 Source 317 enum
5.5.3.10 Preset Reference 310 int16
5.5.3.11 Preset Relative Reference 314 int16
5.5.3.12 Relative Scaling Reference Resource 318 enum
5.5.3.13 Freeze Up/Down Step Delta 312 int16
5.5.3.20 Enable Potentiometer 45 enum
5.5.4 Ramp
5.5.4.1 Ramp 1 Type Selector 340 enum
5.5.4.2 Ramp 1 Accel. Time 341 uint32
5.5.4.3 Ramp 1 Decel. Time 342 uint32
5.5.4.8 Ramp 2 Type Selector 350 enum
5.5.4.9 Ramp 2 Accel. Time 351 uint32
5.5.4.10 Ramp 2 Decel. Time 352 uint32
5.6 Start Settings
5.6.1 Start Zero Speed Time 171 uint8
5.6.2 Start Function 172 enum
5.6.3 Enable Flying Start 173 enum
5.6.4 Start Speed [Hz] 175 uint16
5.6.5 Start Current 176 uint32
5.6.6 Breakaway Current Boost 422 enum
5.6.7 Start Max Speed [Hz] 178 uint16
5.6.8 Start Max Time to Trip 179 uint8
5.6.11 Sync. Motor Start Mode 170 enum
5.6.12 Sync. Motor Detection Current % 146 uint16
5.6.13 Sync. Motor Parking Time 207 uint16
5.6.14 Sync. Motor Parking Current % 206 uint16
5.6.15 Sync. High Starting Torque Time [s] 3020 uint16
5.6.16 Sync. High Starting Torque Current
[%]
3021 uint32
5.7 Stop Settings
5.7.1 Function at Stop 180 enum
5.7.2 Min Speed for Function at Stop [Hz] 182 uint16
5.7.3 DC Brake Time 202 uint16
Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254 | 281