Danfoss VLT AQUA Drive FC 202 User Manual

9.3.79 ALARM 81, CSIV Corrupt
Cause
The CSIV file has syntax errors.
9.3.80 ALARM 82, CSIV Parameter Error
Cause
CSIV failed to initialize a parameter.
9.3.81 ALARM 83, Illegal Option Combination
Cause
The mounted options are incompatible.
9.3.82 ALARM 84, No Safety Option
Cause
The safe option was removed without applying a general reset.
Troubleshooting
Reconnect the safety option.
9.3.83 ALARM 85, Dang Fail PB
Cause
PROFIBUS/PROFIsafe error.
9.3.84 ALARM 88, Option Detection
Cause
A change in the option layout is detected. Parameter 14-89 Option Detection is set to [0] Frozen configuration and the option layout has
been changed.
Troubleshooting
• To apply the change, enable option layout changes in parameter 14-89 Option Detection.
• Alternatively, restore the correct option configuration.
Maintenance, Diagnostics, and
Troubleshooting
Operating Guide | VLT® AQUA Drive FC 202
AQ262141056213en-000101 / 130R0882 | 153
Danfoss A/S © 2018.10

Danfoss VLT AQUA Drive FC 202 Specifications

General

Brand	Danfoss
Model	VLT AQUA Drive FC 202
Category	DC Drives
Language	English