Danfoss VLT AQUA Drive FC 202 User Manual

Parameter International default value North American default value
Parameter 1-53 Model Shift Frequency 16.7 20.0
Parameter 1-56 U/f Characteristic 50 Hz 60 Hz
Parameter 6-15 Terminal 53 High Ref./Feedb. Value 1500 RPM 1800 RPM
Parameter 14-37 Fieldweakening Speed 1400 RPM 1680 RPM
11.4 Required Parameter Settings for Drive Options
On performing a factory reset on the drive, all drive parameters revert to their factory default value. Several drive options have
parameter settings that must be configured differently from the factory default values in order for the options to perform properly.
Table 118: Parameter Setting for the Active Filter Option (Typecode Character 7 = A)
Parameter Change value to
Parameter 5-02 Terminal 29 Mode [1] Output
Table 119: Parameter Settings for the Passive Filter Option (Typecode Character 7 = P/H/L/U)
Parameter Change value to
Parameter 5-02 Terminal 29 Mode [1] Output
Parameter 5-10 Terminal 18 Digital Input [51] External Interlock
Parameter 5-31 Terminal 29 Digital Output [188] AHF Capacitor Connect
Table 120: Parameter Settings for the dU/dt and Sine-wave Filter Options (Typecode Character 18 = D/S/1/2)
Parameter Change value to
Parameter 5-02 Terminal 29 Mode [1] Output
Parameter 14-52 Fan Control [3] On 100%
Table 121: Parameter Settings for the Indicator Light + Reset Button Option (Typecode Character 28–29 = D1/DA/DB/DC/DD/DE)
Parameter Change value to
Parameter 5-40 Function Relay [1] [5] Running
Parameter 5-40 Function Relay [2] [5] Running
Parameter 5-11 Terminal 19 Digital Input [1] Reset
Appendix
Operating Guide | VLT® AQUA Drive FC 202
AQ262141056213en-000101 / 130R0882
194 | Danfoss A/S © 2018.10

Danfoss VLT AQUA Drive FC 202 Specifications

General

Brand	Danfoss
Model	VLT AQUA Drive FC 202
Category	DC Drives
Language	English