1 Introduction
1.1 Purpose of this Operating Guide
This operating guide provides information for safe installation and commissioning of the AC drive. It is intended for use by qualified
personnel. Read and follow the instructions to use the drive safely and professionally. Pay particular attention to the safety instructions
and general warnings. Always keep this operating guide available with the drive.
1.2 Additional Resources
Other resources are available to understand advanced drive functions and programming.
• The programming guide provides greater detail on working with parameters and shows many application examples.
• The design guide provides detailed information about capabilities and functionality to design motor control systems.
• The Safe Torque Off Operating Guide provides detailed specifications, requirements, and installation instructions for the Safe
Torque Off function.
• Supplementary publications and manuals are available from Danfoss.
See https://www.danfoss.com/en/search/?filter=type%3Adocumentation.
1.3 Manual Version
This manual is regularly reviewed and updated. All suggestions for improvement are welcome.
The original language of this manual is English.
Table 1: Manual and Software Version
Version Remarks Software version
MG80H102 First version 3.31
1.4 Approvals and Certifications
The following list is a selection of possible type approvals and certifications for Danfoss drives:
Introduction
Operating Guide | VLT® AQUA Drive FC 202
AQ262141056213en-000101 / 130R0882
8 | Danfoss A/S © 2018.10
To Next Page
Loading...
Need help?
General