EasyManuals Logo

Danfoss VLT AQUA Drive FC 202 User Manual

Danfoss VLT AQUA Drive FC 202
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
The specific approvals and certification for the enclosed drive are on the nameplate of the drive. For more information, contact the
local Danfoss office or partner.
Themal memory retention requirement
This enclosed drive complies with UL 508C and UL 61800-5-1 thermal memory retention requirements. The enclosed drive is UL listed
per UL508A and CSA 14 standards. For more information on UL 508C thermal memory retention requirements, refer to the Motor
Thermal Protection section in the product-specific design guide.
NOTICE
OUTPUT FREQUENCY LIMIT
Due to export control regulations, the output frequency of the drive is limited to 590 Hz. For demands exceeding 590 Hz,
contact Danfoss.
ADN-compliance
For more information on compliance with the European Agreement concerning International Carriage of Dangerous Goods by Inland
Waterways (ADN), refer to section ADN-compliant Installation in the product-specific design guide.
1.5 Disposal
Do not dispose of equipment containing electrical components together with domestic waste. Collect it separately in accordance with
applicable local regulations.
Introduction
Operating Guide | VLT® AQUA Drive FC 202
AQ262141056213en-000101 / 130R0882 | 9
Danfoss A/S © 2018.10

Table of Contents

Other manuals for Danfoss VLT AQUA Drive FC 202

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Danfoss VLT AQUA Drive FC 202 and is the answer not in the manual?

Danfoss VLT AQUA Drive FC 202 Specifications

General IconGeneral
BrandDanfoss
ModelVLT AQUA Drive FC 202
CategoryDC Drives
LanguageEnglish

Related product manuals