4 Mechanical Installation
4.1 Items Supplied
Items supplied can vary according to product configuration.
• Make sure that the items supplied and the information on the nameplate correspond to the order confirmation.
• Visually check the packaging and the drive for damage caused by inappropriate handling during shipment. File any claim for
damage with the carrier. Retain damaged parts for clarification.
1 Type code
3 Power rating
5 Output voltage, frequency, and current (at low/high voltages)
2 Part number and serial number
4 Input voltage, frequency, and current (at low/high voltages)
6 Discharge time
Illustration 12: Example of a Product Nameplate for E6h Enclosure (IEC Version on Left, UL Version on Right)
NOTICE
WARRANTY
Removing the nameplate from the drive can result in the loss of warranty.
4.2 Split Shipment
Depending on what options are ordered with an enclosed drive, the drive can consist of 5 cabinets and measure 3400 mm (134 in) in
width, which can be difficult to transport and handle. In cases where an enclosed drive exceeds 1800 mm (71 in) in width, the cabinets
are separated and shipped in multiple boxes. All necessary fasteners needed for reassembly are provided in the delivery. To reassemble
a split shipment, refer to 4.10 Combining Multiple Cabinets from a Split Shipment and 5.6.1 Connecting Wiring Harnesses.
Mechanical Installation
Operating Guide | VLT® AQUA Drive FC 202
AQ262141056213en-000101 / 130R0882 | 31
Danfoss A/S © 2018.10
To Next Page
Loading...
Need help?
General