4.10 Combining Multiple Cabinets from a Split Shipment
Procedure
1. Make sure the cabinets are in the right order and place them side by side. For the proper order, refer to 3.2 What is an Enclosed
Drive?.
2. Attach the cabinets to one another:
A Remove the Rittal back cover from each cabinet.
B Secure the back side of the cabinets to one another using the back brackets. See
illustration 14.
C Secure the front side of the cabinets to one another using the front brackets. See illustration 14.
D Secure the lifting eyelets to the top of the cabinets. See illustration 15.
E Join the grounding bars using the connector piece (see the shaded piece in illustration 16).
Example:
1 Front brackets 2 Back brackets
Illustration 14: Bracket Mounting Points for Cabinets
Mechanical Installation
Operating Guide | VLT® AQUA Drive FC 202
AQ262141056213en-000101 / 130R0882 | 37
Danfoss A/S © 2018.10