Danfoss VLT - Page 44

0-41 [Off] Key on LCP
Option: Function:
[0] Disabled No function
[1] * Enabled [Off] Key is enabled
[2] Password Avoid unauthorized stop. If par. 0-41
[Off] Key on LCP is included in the My Personal Menu, then
define the password in par. 0-65
Personal Menu Password . Otherwise define the password in
par. 0-60
Main Menu Password .
[3] Enabled without OFF
[4] Password without OFF
[5] Enabled with OFF
[6] Password with OFF
0-42 [Auto on] Key on LCP
Option: Function:
[0] Disabled No function
[1] * Enabled [Auto on] Key is enabled
[2] Password Avoid unauthorized start in Auto mode. If par. 0-42
[Auto on] Key on LCP is included in the My
Personal Menu, then define the password in par. 0-65
Personal Menu Password . Otherwise define
the password in par. 0-60
Main Menu Password .
[3] Enabled without OFF
[4] Password without OFF
[5] Enabled with OFF
[6] Password with OFF
0-43 [Reset] Key on LCP
Option: Function:
[0] Disabled No function
[1] * Enabled [Reset] Key is enabled
[2] Password Avoid unauthorized resetting. If par. 0-43
[Reset] Key on LCP is inclu ded in th e p a r. 0- 2 5 My Personal
Menu
, then define the password in par. 0-65 Personal Menu Password . Otherwise define the pass-
word in par. 0-60
Main Menu Password .
[3] Enabled without OFF
[4] Password without OFF
[5] Enabled with OFF
[6] Password with OFF
3.2.7 0-5* Copy / Save
Copy parameter settings between set-ups and to/from the LCP.
3 Parameter Description VLT
®
HVAC Drive Programming Guide
44 MG.11.C9.02 - VLT
®
is a registered Danfoss trademark
3