Table 2. Rear view of the system(continued)
Item Ports, panels, or slots Icon Description
NOTE: To reset the iDRAC (if not disabled on the iDRAC setup
page by pressing F2 during system boot), press and hold the
System ID button for more than 15 seconds.
6 PCIe expansion card riser 4
(slot 3)
NA The expansion card riser enables you to connect PCI Express
expansion cards.
7 Dedicated iDRAC9 Ethernet
port
Enables you to remotely access iDRAC. For more information,
see the Integrated Dell Remote Access Controller User's Guide at
www.dell.com/poweredgemanuals.
8 USB 2.0 port The USB port is 4-pin, 2.0-compliant. This port enables you to
connect USB devices to the system.
9 USB 3.0 port The USB port is 9-pin and 3.0-compliant. This port enables you to
connect USB devices to the system.
10 PCIe expansion card riser 4
(slot 4)
NA The expansion card riser enables you to connect PCI Express
expansion cards.
11 Power supply unit (PSU) 4 N/A PSU4 is the fourth PSU of the system.
12 Power supply unit (PSU) 3 N/A PSU3 is the third PSU of the system.
13 Power supply unit (PSU) 2 PSU2 is the secondary PSU of the system.
14 Power supply unit (PSU) 1 PSU1 is the primary PSU of the system.
15 Manifold NA The Manifold liquid cooling allows cooling for the GPUs and
processors.
Dell PowerEdge XE9640 system configurations and features 11
To Next Page
Loading...
