NOTE: Zb is the nominal rear wall external surface where the system board I/O connectors reside.
System weight
Table 4. Weight for the PowerEdge XE9640 system
System configuration Maximum weight (with all drives/SSDs)
XE9640 system with Intel GPUs 43.2 kg (95.23 pounds)
XE9640 system with NVIDIA GPUs 46.3 kg (102.07 pounds)
Table 5. PowerEdge system weight handling recommendations
Chassis weight Description
40 pounds - 70 pounds Recommend two person to lift
70 pounds- 120 pounds Recommend three person to lift
≥ 121 pounds Recommend to use a server-lift
NOTE: The system is heavy therefore can slide over and cause damage during installation and removal from a higher
position on the rack.
Processor specifications
Table 6. PowerEdge XE9640 processor specifications
Supported processor Number of processors supported
4
th
Generation Intel Xeon Scalable processors Two
PSU specifications
The PowerEdge XE9640 system supports up to 4 AC or DC power supply units (PSUs) with 2+0 Non redundant, full power with
2x PSUs, 2+1 - N+1 redundancy, 2+2 - N+N redundancy.
NOTE:
1. The wattage capacities of any two PSUs that are present during POST are compared. The larger of the two PSUs is
activated if the PSU wattages don't match. A PSU mismatch alert is also visible in the BIOS, iDRAC, or on the system
LCD.
2. If a second PSU is installed during runtime, its wattage capacity must match that of the first PSU in order for it to be
enabled. If not, the second PSU won't be activated and the PSU will be marked as mismatched in iDRAC.
Table 7. PSU specifications
PSU Class Heat
dissipation
(maximum
) (BTU/hr)
Frequency
(Hz)
Voltage High line
240 VDC
Low line
100–120 V
DC Current
(A)
AC Current
(A)
2800 W
AC
Titaniu
m
10165 BTU/
hr
50/60
200-240 V AC 2800 W NA NA 15.6 - 12.7 A
2800 W
HVDC
NA
10220
BTU/hr
NA
240 V DC 2800 W NA 13.6 A NA
NOTE: This system is also designed to connect to the IT power systems with a phase-to-phase voltage not exceeding 240
V.
22 Technical specifications
To Next Page
Loading...
