Dell PowerEdge XE9640 - Turtle Shell; Removing the Turtle Shell; Installing the Turtle Shell

Turtle shell
This is a service technician replaceable part only.
Removing the turtle shell
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
Steps
Using the two fingers, lift the turtle shell from the DLC module.
Figure 92. Lift the turtle shell
Next steps
Replace the turtle shell.
Installing the turtle shell
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
Steps
Using the two finger, align and install the turtle shell on the DLC module. Ensure to align the triangle mark on the turtle shell
with the triangle mark on the DLC module.
120
Installing and removing system components