5. Slide the PDB2 along with the tray toward front of the chassis and lift the PDB2 with tray away form the chassis along with
the VSB cables.
Figure 227. Removing the PDB2
6. Using Phillips screwdriver 2, loosen the screw to disengage VSB cables from the PDB2 connecting from the system board.
7. Remove all the screws and lift the PDB2 from the PDB2 tray.
Figure 228. Remove the PDB2 from the PDB2 tray
Next steps
Replace the PDB2.
Installing and removing system components
215
To Next Page
Loading...
