Figure 288. Cold and hot tube correct installation positions
Next steps
1. For NVIDIA GPU configurations:
a. Plug the GPU cold plate tubes to the Manifold Liquid cooling module.
b. Slide in the system board tray.
c. Reconnect the liquid cooling tubes 11 and 12 from the Manifold for DLC module.
d. Install the lower brace bracket.
e. Reconnect all the cables onto the system board. For more information, see Cabling diagram.
f. Install the risers.
g. Install the storage tray .
h. Install the VSB cables on the system board.
i. Follow the procedure listed in the After working inside your system.
2. For Intel GPU configurations:
a. Plug the cold plate tubes to the Manifold Liquid cooling module.
b. Slide in the system board tray.
c. Reconnect the liquid cooling tubes 11 and 12 from the Manifold for DLC module.
d. Install the lower brace cover.
e. Reconnect all the cables onto the system board. For more information, see Cabling diagram.
f. Install the risers.
g. Install the storage tray .
h. Install the VSB cables on the system board.
i. Follow the procedure listed in the After working inside your system.
.
256
Installing and removing system components
To Next Page
Loading...
