AS-FEN02
With its own standalone communication port, the extension card can work independently and can be set as a
MODBUS TCP server, Client or EtherNet/IP Adapter. After installing the extension card, go to the HWCONFIG
in ISPSoft to set up the communication.
Ethernet communication interface
10/100BASE-T (X) full duplex, switched Ethernet
Modbus TCP Server, Client and EtherNet/IP Adapter
AS-FOPC02
With its own standalone communication port, the extension card can work independently and can be set as a
Modbus TCP Server and OPC UA Server. After AS-FOPC02 is installed on the PLC, you need to go to
HWCONFIG to edit the parameters.
Ethernet communication interface
10/100BASE-T (X) full duplex, switched Ethernet
Modbus TCP Server and OPC UA Server
AS-FPFN02
With its own standalone communication port, the extension card can work independently and can be set as a
PROFINET slave to connect to PROFINET network and exchange data with PROFINET master. After
installing the extension card, go to the PROFINET Configurator to set up the communication and download
the configurations to the master and then the master sends the configurations to the function card.
Ethernet communication interface
10/100BASE-T (X) full duplex, switched Ethernet
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...
Need help?
General
