Delta AX Series - Page 297

AX-Series Motion Controller Instructions Manual Chapter 2
292
Setting Value Name Function
16 PARAM_RAMP_TYPE
Velocity ramp type
17 PARAM_MAX_VELOCITY_LIMIT
Max. velocity limit
18 PARAM_MAX_ACCELERATION_LIMIT
Limit on max. acceleration
19 PARAM_MAX_DECELERATION_LIMIT
Limit on max. deceleration
21
*
PARAM_PLANNING_PRIORITY
Velocity ramp planning is prioritized
22 PARAM_STOP_METHOD
Stop method
24 PARAM_VELOCITY_WARNING_PERCENTAGE
Velocity warning range
25 PARAM_ACCELERATION_WARNING_PERCENTAGE
Acceleration warning range
26 PARAM_DECELERATION_WARNING_PERCENTAGE
Deceleration warning range
28 PARAM_RADIUS_CORRECTION_PERCENTAGE Allowable correction range of radius
*Note: DL_MotionControl Version 1.2.0.0 and later supports the above features.