DGSHAPE DWX-52DCi - 0000 the Spindle Motor Temperature Is too High; 0000 the Spindle Can Not be Turned; 0000 the Spindle Has Collided with the Rotary Axis Unit

Responding to Error Messages
104
Chapter 4 FAQ
C
Allow the machine to rest for some time before turning on the power.
The motor may have overheated.
"102B-0000" The spindle motor temperature is too high.
Situation/Error Cause
• The milling bur is worn.
• A workpiece that cannot be milled by the machine is being used.
• The milling conditions are too strict.
Procedure
A
Turn off the power.
B
Check the milling bur, the workpiece, and the CAM settings as well as the shape specied
in the milling data.
C
Allow the machine to rest for some time before turning on the power.
The motor may have overheated.
"102D-0000" The spindle can not be turned.
Situation/Error Cause
The cable may be broken or the spindle unit may be defective.
Procedure
Turn off the power and contact your authorized DGSHAPE Corporation dealer.
"102E-0000" The spindle has collided with the rotary axis unit.
Procedure
A
Turn off the power.
B
Check the milling bur, the workpiece, and the CAM settings as well as the shape specied
in the milling data.
Remove any pieces of cutting waste and foreign objects that have afxed to the adapter stocker.
C
Turn on the power.