Retightening the Collet
Continuous milling will cause the collet to become loose, making it easy for the milling bur to come o.
Periodically retighten the collet.
Recommended Interval for This Work
• Once a month, or when the total work time of the spindle exceeds 200 hours (with slight variation depending
on the work situation).
" P.14 ""Maintenance" Tab"
Required Items
Detection pin Wrench
Procedure
A
Open the "Settings" window.
1 In the top window of VPanel, select the machine to operate.
When you have connected multiple machines, you can switch between the machines by clicking
under MACHINE STATUS.
2 Click .
The "Settings" window will appear.
B
Click [Open collet] on the "Maintenance" tab.
The collet will open.
Periodic Maintenance
71
Chapter 3 Maintenance
To Next Page
Loading...
