"Milling bur management" Window
By selecting a milling bur to be used, the work time of the selected milling bur will be recorded automatically. In
addition, when the bur reaches the preset replacement time, a warning message will be displayed. When more
than one machine is connected, the machine selected in the top window is managed.
Symbol or display Explanation
Click to display the milling burs for which "Milling bur registration" was
performed. Numbers
①
through
⑮
match the milling bur stocker numbers on
the machine's ATC magazine. The name and work situation of the milling bur
currently in use will be displayed on the top window.
" P.23 ""Milling bur registration" Window"
Displays the work time and replacement time of the selected milling bur. When
the bur reaches the preset replacement time, a warning message will be
displayed. The replacement time can be changed from "Milling bur registration."
After replacing the milling bur with a new one, click "Reset" to set the work time
to 0.
By setting multiple milling bur stockers as a single set, you can automatically
replace milling burs that reach their replacement time during milling.
" P.22 "Intelligent Tool Control (ITC) Function Settings"
Milling bur
registration
Here you can register milling burs whose work time you want to manage, or
remove burs you no longer want to manage. Click this button to display the
"Milling bur registration" window.
" P.23 ""Milling bur registration" Window"
Milling bur info
1 11
12
13
2
3
Milling bur stocker
number
VPanel Window and Functions
21
Chapter 1 Basic Operation
To Next Page
Loading...
