DGSHAPE DWX-52DCi - Chapter 4 FAQ

78
Chapter 4 FAQ
Chapter 4 FAQ
Machine Trouble .............................................................................................................................. 79
Initial Operations Are Not Performed or Fail ..............................................................79
The Operation Button Does Not Respond ..................................................................79
VPanel Does Not Recognize the Machine ................................................................... 79
Adapter IDs Cannot Be Read ............................................................................................ 80
No Data Is Being Output to the Machine, or the Machine Will Not Operate
Even Though Data Is Being Output................................................................................ 80
The Computer Shuts Down When Connecting Multiple Machines ................... 81
The Adapter in Adapter Stocker Number 6 Cannot Be Replaced ....................... 81
The Spindle Does Not Rotate ........................................................................................... 81
The Ionizer Is Ineective (Milling Waste Collects around the Milling Area) ....81
Compressed Air Does Not Come Out ............................................................................82
Automatic Correction Fails ................................................................................................ 82
The Cleaning Tool Is Not Eective .................................................................................. 83
Milling Quality Problems ............................................................................................................... 84
The Milled Surface Is Not Attractive .............................................................................. 84
There Is a Line of Level Dierence in the Milling Results ....................................... 84
Chipping Occurs (Edges of Milling Products Become Chipped) .........................84
A Hole Opens in the Milling Results .............................................................................. 86
The Dimensions of the Milling Results Do Not Match ............................................ 86
Installation Problems ...................................................................................................................... 87
Installing the Driver Separately .......................................................................................87
Installing the Software and the Electronic-format Manuals Separately ........... 89
Driver Installation Is Impossible ...................................................................................... 90
Uninstalling the Driver .......................................................................................................92
Uninstalling VPanel ..............................................................................................................93
Responding to Error Messages .................................................................................................... 94