Step 4: Setting the Cleaning Tool
If you are not using the cleaning tool, proceed to the next step.
Materials for Which the Cleaning Tool Is Effective
Zirconia, composite resin, and CoCr sintered metal
Required Items
Cleaning tool Milling bur holder Mounting screw Hexagonal screwdriver
Procedure
A
Remove the cleaning tool tube.
B
Attach the milling bur holder to the cleaning tool, aligning the milling bur holder with the
marked position on the cleaning tool.
Marked
position
Marked
position
Tube
Starting Milling
47
Chapter 2 Milling
To Next Page
Loading...
