Dieci APOLLO MINI AGRI - Wheels Alignment Check

Components description | 8
AXH1230‐UK ﴾ENG﴿ ‐ Apollo KM 111
During normal use of the machine, frequently changing the
steering modes, it is possible that the wheels are no longer
perfectlyalignedwitheachother.
To perform a proper wheel alignment, perform the following
steps:
1. Stopthemachineonalevelground.
2. SelecttheBorCsteeringmode
3. Turnthesteeringwheeluntiltherearwheelsarealignedto
themachine.
4. SelecttheAsteeringmode
5. Turnthesteeringwheeluntilthefrontwheelsarealignedto
themachine.
6. Try to move slowly for a few meters to verify that the
machinetravelsproperlyinastraightline.
If at the end of the alignment the machine still does not
proceed in a straight line, repeat the wheels alignment.
150312-2
8.6 Wheels alignment check *
NOTICE
The wheels alignment check is an optional accessory.
CAUTION
Perform the wheel alignment periodically (every 8-10 hours) depending on the continuous use of the
vehicle.