Safety regulations | 5
AXH1230‐UK ﴾ENG﴿ ‐ Apollo KM 53
– Switches
– Indicatorlights
– Windscreenwipers
– Reversemovementalarm
– Positionandconditionofrearviewmirrors
DANGER
Immediately stop using the machine in case of malfunctions or if it does not comply with
safety standards.
Contact an authorized Dieci s.r.l. workshop if the machine shows malfunctions. Refer to the
"Maintenance" chapter for information regarding routine maintenance.
NOTICE
A thorough inspection is required if the machine is not used for a prolonged period of time. A detailed
description of the operations is provided in the "Machine storage" chapter.
5.16.2.2 Inspecting the work area
– Examinethe workareawhenworkingat theedgeofanexcavation oronsoftgroundasthemachine
couldoverturn.
– Examinetheconformationandconditionoftheterrainoftheworkareabeforebeginningtooperate.
– Keepthemachinewellawayfromtheedgeoftheexcavationandthesideoftheroad.
– Whenworkingonaslopeorneartheroadside,haveanotherpersonpresentforsignaling.
– Payutmostattention when workingonicy ground. Theicewill melt asthetemperaturerises andthe
groundwillbecomeslippery.
– Checkforanyoverheadpowerlinesorundergroundpiping.
– Donotworkinplacesatriskoflandslidesorfallingrocks.
– Takedueprecautionstopreventanyunauthorizedpersonsfromenteringtheworkingarea.
– Whenmovingthroughoroperatinginshallowwaterorsoftground,verifytheshapeandtheconditions
oftheland,thewaterdepthandflowratebeforebeginningtheoperation.
5.16.3 Starting-up the engine
Proceed as follows to start-up the engine of the vehicle:
1. Presstheparkingbrakeswitch.
2. Bringthemovementselectionlevertoneutral.
3. Remainseatedinthedriver'sseat.
4. Turntheignitionkey(fig.1505381)clockwisetoposition”1”.
Withthekeyinthisposition:
– Thecontrolpanelandinstrumentpanelwillbepowered
– A buzzer will sound, indicating that the key has been
inserted.This buzzeralso servestowarnanypersonsinthe
surroundingareathatthevehiclehasbeenstartedup.
1505381