Dieci APOLLO MINI AGRI - Preliminary Maintenance Operations; Prepare the Vehicle for Maintenance

Maintenance | 11
AXH1230‐UK ﴾ENG﴿ ‐ Apollo KM 197
Boomchassispinlubricationpoints.
Wheelslubricationpoints.
Swingingcylinderlubricationpoints.
11.8 Preliminary maintenance operations
11.8.1 Prepare the vehicle for maintenance
CAUTION
Before performing maintenance work on your vehicle, do the following:
– Parkthevehicleonflat,evenground.
– Engagetheparkingbrake.
– Lowerandfullyretractallmobileparts(booms,shovels,etc.).
– Ifthemaintenanceoperationrequiresthemobilepartstoremainup,applythesafetyrod.
– Runtheengineataminimumfor60secondstocoolitdown.
– Releaseresidualpressurefromthehydraulicsystem.
– Switchoffthekeyintheignitionswitch.
– Removetheignitionkey.
– Hangupasignthatindicatesmaintenanceworkisunderway.Thissigncanbehungonthecabdoorand
insideitonthecontrols.
– Setupbarriersandspacerstopreventunauthorizedpersonnelfromapproachingthevehicle.
– Disconnectthebatterycutoffswitch.
– Allowtheenginetocooldown.
WARNING
Use appropriate personal protective equipment during the various checking and maintenance operation
of the vehicle.