Dieci APOLLO MINI AGRI - Seat

8 | Components description
80 AXH1230‐UK ﴾ENG﴿ ‐ Apollo KM
8.1.14 Seat
8.1.14.1 Deadman seat sensor
Thevehicleisequippedwithasafetysystemcalled"deadman"
which consists of an electrical microswitch inside the seat
cushion“1”(fig.1504131).
1
150413-1
CAUTION
The engine can be started only if the operator is seated properly in the driving seat and the gear lever is in
neutral “N”.
Iftheengineisrunningandtheoperatorisnotsittingproperlyinthedriver'sseatforatimelongerthan3
seconds,thetransmissionisautomaticallydisabledandtheparkbrakeisengaged.
Tocontinuemovingthemachine,theoperatormustsitinthedriver'sseatandsetthemovementselection
leverinposition"N".
8.1.14.2 Seat adjustment
CAUTION
Correctly position the seat.
The seat is properly positioned when the operator is able to perform a full stroke to the brake pedal by
holding the back against the backrest of the seat itself.
Theseatcanbeadjustedtodifferentpositions:
Backrest inclination
To adjust the inclination of the backrest (fig. 1504151), lift the
leverontheleftsideandletthebackrestadapttotherequired
position.Releasethelevertoblockthebackrest.
150415-1