8 | Components description
84 AXH1230‐UK ﴾ENG﴿ ‐ Apollo KM
To remove the belt it is necessary to:
1. Presstheredbutton“1”onthebuckle“2”.
2. Thenremovethelatchplate“3”.
1504163
WARNING
Drive the vehicle only with safety belt properly worn, fastened and adjusted.
Operating without the seat belt fastened increases the risk of accidents.
Do not use damaged or worn seat belts. If worn, damaged or yielded belts are used, they can break or
yield in case of collision resulting in serious injury to the operator.
8.1.15 Emergency Lights
Presstheemergencylightsswitch"1"(fig.1504191)toturnon
allfourdirectionindicators.
Thesidelightsturningonisindicatedbytheswitchflashingand
byindicator"2"ontheinstrumentpanelofthemachine.
150419-1